Ir al contenido
ImágenesGratis

Generar exterior de casa terminada desde plano

Plantilla de prompt completa que convierte un plano/maqueta 3D de referencia (@img1) en una foto exterior fotorrealista de una casa terminada de una planta, con fidelidad estricta a la huella, ventanas, puertas y mobiliario, y materiales personalizables entre 【】.

Gemini

Ejemplos de la fuente

Estas imágenes provienen de la fuente original. DROPIDEA no ha probado estos ejemplos; los resultados dependen del modelo y los ajustes.

Listo para personalizar

Tu prompt

Inglés

Sustituye las variables en rojo por tus datos. Copia el texto completo y úsalo con tu agente preferido.

TXT MD Versión en inglés
④ Generate an exterior image of the completed house Next, referring to the 3D floor plan, create an image of the completed house. Please use the following prompt as a template. If you insert your completed image concept into the parts enclosed in 【】, an exterior matching that instruction will be generated. ※There are multiple 【】 This part is also easier if you ask a generative AI like Claude. After modifying the template, generate the image with Nano Banana Pro. Template↓ -------------- # Optimized Image Generation Prompt — Floor Plan / Dollhouse → Exterior Photo ## 1. Core Concept & Objective A photorealistic architectural exterior photograph of the COMPLETE finished house derived from the reference `@img1` (a roofless top-down dollhouse / floor plan). Build the full building envelope: add a roof, exterior walls, façade, windows, and a front entrance, while keeping the overall footprint, proportions, room positions, window/door placement, and interior furniture layout strictly consistent with `@img1`. The reference defines the exact layout and scale — the output is a real, fully built single-story house seen from outside, whose form is a faithful 1:1 translation of the plan. ## 2. Layout Fidelity (Strict — Highest Priority) The exterior MUST be a direct, faithful translation of the floor plan in `@img1`. Obey the geometry of the plan exactly: - **Footprint & proportions:** The building is a single, wide HORIZONTAL RECTANGLE (landscape footprint, roughly 16:9). Do not make it square, L-shaped, or multi-volume. Keep the same width-to-depth ratio as `@img1`. - **Single story:** Exactly one level. No second floor, no loft, no basement, no stairs. - **Entrance location:** The main front entrance sits at the BOTTOM-CENTER of the plan, so it must appear at the CENTER of the FRONT (camera-facing) façade. Do not move it to a corner or side. - **Window positions = plan openings:** Place exterior windows ONLY where window openings exist in `@img1`, on the matching wall, in the matching position and relative width. Front façade windows correspond to the rooms along the bottom edge (entrance hall and living room); side and rear windows correspond to the bedrooms, kitchen, and bathroom openings. Do not add windows to blank wall sections, and do not delete openings shown in the plan. - **Door positions:** Exterior doors (the main entrance and any secondary exterior doors shown in `@img1`, e.g. the kitchen-side and living-room-side doors) appear at their corresponding wall locations. The main entry is a single centered front door. - **Interior furniture visible through glazing (match the plan):** Through the windows and glass doors the interior must be faintly but clearly visible, and the furniture seen inside MUST match the placement, type, and orientation drawn in `@img1`. Behind the living-room glazing show the sofas and coffee table where the plan places them; behind the dining glazing show the dining table and chairs; behind the kitchen window show the kitchen counter/island; behind each bedroom window show the bed in its plan position. Do NOT invent furniture in empty areas, and do NOT rearrange, add, or relocate furniture relative to the plan. Keep it as a soft, realistic interior glimpse (not a sharp catalog shot), consistent with the room each window belongs to. - **Room-to-façade logic:** The wider, more open spaces (living room, dining, kitchen) get larger glazing; the bedrooms, bathroom, and toilet get smaller/higher windows. Wall solidity and window rhythm must read as the same layout as the plan. - **Forbidden:** Do NOT invent extra wings, extensions, garages, balconies, or rooms not present in `@img1`. Do NOT change the number, order, or position of openings or furniture. The reference is the source of truth for FORM and FURNITURE PLACEMENT. Materials, roof, garden, sky, and lighting (Sections 4–5) are free creative additions, but they must never alter the footprint, story count, opening positions, or furniture layout defined above. ## 3. View & Output Rules **VIEW RULE:** Eye-level exterior view from the front, slight three-quarter angle (about 15–25° off-axis) to show the front façade and one side. Ground-level human perspective, NOT top-down, NOT a floor plan. Show the whole house within the frame with a little space around it. Keep the bottom-center entrance clearly visible on the front façade. **UNOBSTRUCTED RULE (important):** The ENTIRE house must be fully visible and completely unobstructed. Do NOT place any object between the camera and the building. Absolutely NO trees, tall shrubs, hedges, ornamental grasses, potted plants, fences, walls, poles, cars, people, signage, or any element that overlaps, covers, or blocks any part of the façade, roof, windows, or entrance. The foreground in front of the house is kept clear (low lawn or paving only). Every wall, window, and door of the house reads cleanly with nothing crossing in front of it. **TEXT RULE:** Do NOT include any text, labels, dimensions, arrows, watermark, or floor-plan markings of any kind. A clean photographic image only. ## 4. Subject & Materials A modern single-story residence matching the size and proportions of `@img1`. - **Architectural style:** 【modern minimalist / Scandinavian / Japandi — choose to taste】. - **Number of stories:** single-story (one level), low horizontal massing. - **Entrance:** a clear front entry at the center of the front façade with a 【timber pivot / glass】 front door. - **Glazing:** floor-to-ceiling windows and sliding glass doors at the plan's opening positions, clear enough that the interior furniture (matching `@img1`) stays faintly visible inside; use only sheer/partial curtains so the rooms and their furniture remain readable. - **Roof:** 【dark charcoal standing-seam metal】 roof, low-pitch gable, with slim gutters and eaves, sized to the rectangular footprint. - **Walls:** a mix of 【warm vertical timber cladding】 and 【smooth off-white render/stucco】. - **Framing & trim:** black aluminium window frames. - **Landscaping:** keep it minimal and LOW so nothing blocks the house — a neat, flat green lawn and a 【pale stone / concrete paver】 path leading straight to the centered entrance. No trees, no tall plants, no shrubs in front of the building; the façade stays fully exposed. - Cohesive, high-end, natural material palette: warm wood, off-white, charcoal, soft greens. ## 5. Technical Specifications ### 5.1 Photography Style Professional real-estate / architectural exterior photography, Architectural Digest style, ultra-realistic, sharp, magazine-quality. ### 5.2 Lighting Bright sunny midday with clear, cloudless deep-blue sky and strong overhead sunlight. Crisp, even natural daylight evenly illuminating the whole façade, true-to-life colors, gentle short midday shadows, warm interior glow faintly visible through the glass. No sunset, no golden hour, no overcast, no haze. ### 5.3 Camera Settings Full-frame DSLR, wide-angle architectural lens (~24mm), corrected verticals (no keystone distortion), eye-level tripod height, f/8 aperture, high dynamic range (HDR), razor-sharp focus across the whole building.
Ver resultados

Tu prompt

④ Generate an exterior image of the completed house Next, referring to the 3D floor plan, create an image of the completed house. Please use the following prompt as a template. If you insert your completed image concept into the parts enclosed in 【】, an exterior matching that instruction will be generated. ※There are multiple 【】 This part is also easier if you ask a generative AI like Claude. After modifying the template, generate the image with Nano Banana Pro. Template↓ -------------- # Optimized Image Generation Prompt — Floor Plan / Dollhouse → Exterior Photo ## 1. Core Concept & Objective A photorealistic architectural exterior photograph of the COMPLETE finished house derived from the reference `@img1` (a roofless top-down dollhouse / floor plan). Build the full building envelope: add a roof, exterior walls, façade, windows, and a front entrance, while keeping the overall footprint, proportions, room positions, window/door placement, and interior furniture layout strictly consistent with `@img1`. The reference defines the exact layout and scale — the output is a real, fully built single-story house seen from outside, whose form is a faithful 1:1 translation of the plan. ## 2. Layout Fidelity (Strict — Highest Priority) The exterior MUST be a direct, faithful translation of the floor plan in `@img1`. Obey the geometry of the plan exactly: - **Footprint & proportions:** The building is a single, wide HORIZONTAL RECTANGLE (landscape footprint, roughly 16:9). Do not make it square, L-shaped, or multi-volume. Keep the same width-to-depth ratio as `@img1`. - **Single story:** Exactly one level. No second floor, no loft, no basement, no stairs. - **Entrance location:** The main front entrance sits at the BOTTOM-CENTER of the plan, so it must appear at the CENTER of the FRONT (camera-facing) façade. Do not move it to a corner or side. - **Window positions = plan openings:** Place exterior windows ONLY where window openings exist in `@img1`, on the matching wall, in the matching position and relative width. Front façade windows correspond to the rooms along the bottom edge (entrance hall and living room); side and rear windows correspond to the bedrooms, kitchen, and bathroom openings. Do not add windows to blank wall sections, and do not delete openings shown in the plan. - **Door positions:** Exterior doors (the main entrance and any secondary exterior doors shown in `@img1`, e.g. the kitchen-side and living-room-side doors) appear at their corresponding wall locations. The main entry is a single centered front door. - **Interior furniture visible through glazing (match the plan):** Through the windows and glass doors the interior must be faintly but clearly visible, and the furniture seen inside MUST match the placement, type, and orientation drawn in `@img1`. Behind the living-room glazing show the sofas and coffee table where the plan places them; behind the dining glazing show the dining table and chairs; behind the kitchen window show the kitchen counter/island; behind each bedroom window show the bed in its plan position. Do NOT invent furniture in empty areas, and do NOT rearrange, add, or relocate furniture relative to the plan. Keep it as a soft, realistic interior glimpse (not a sharp catalog shot), consistent with the room each window belongs to. - **Room-to-façade logic:** The wider, more open spaces (living room, dining, kitchen) get larger glazing; the bedrooms, bathroom, and toilet get smaller/higher windows. Wall solidity and window rhythm must read as the same layout as the plan. - **Forbidden:** Do NOT invent extra wings, extensions, garages, balconies, or rooms not present in `@img1`. Do NOT change the number, order, or position of openings or furniture. The reference is the source of truth for FORM and FURNITURE PLACEMENT. Materials, roof, garden, sky, and lighting (Sections 4–5) are free creative additions, but they must never alter the footprint, story count, opening positions, or furniture layout defined above. ## 3. View & Output Rules **VIEW RULE:** Eye-level exterior view from the front, slight three-quarter angle (about 15–25° off-axis) to show the front façade and one side. Ground-level human perspective, NOT top-down, NOT a floor plan. Show the whole house within the frame with a little space around it. Keep the bottom-center entrance clearly visible on the front façade. **UNOBSTRUCTED RULE (important):** The ENTIRE house must be fully visible and completely unobstructed. Do NOT place any object between the camera and the building. Absolutely NO trees, tall shrubs, hedges, ornamental grasses, potted plants, fences, walls, poles, cars, people, signage, or any element that overlaps, covers, or blocks any part of the façade, roof, windows, or entrance. The foreground in front of the house is kept clear (low lawn or paving only). Every wall, window, and door of the house reads cleanly with nothing crossing in front of it. **TEXT RULE:** Do NOT include any text, labels, dimensions, arrows, watermark, or floor-plan markings of any kind. A clean photographic image only. ## 4. Subject & Materials A modern single-story residence matching the size and proportions of `@img1`. - **Architectural style:** 【modern minimalist / Scandinavian / Japandi — choose to taste】. - **Number of stories:** single-story (one level), low horizontal massing. - **Entrance:** a clear front entry at the center of the front façade with a 【timber pivot / glass】 front door. - **Glazing:** floor-to-ceiling windows and sliding glass doors at the plan's opening positions, clear enough that the interior furniture (matching `@img1`) stays faintly visible inside; use only sheer/partial curtains so the rooms and their furniture remain readable. - **Roof:** 【dark charcoal standing-seam metal】 roof, low-pitch gable, with slim gutters and eaves, sized to the rectangular footprint. - **Walls:** a mix of 【warm vertical timber cladding】 and 【smooth off-white render/stucco】. - **Framing & trim:** black aluminium window frames. - **Landscaping:** keep it minimal and LOW so nothing blocks the house — a neat, flat green lawn and a 【pale stone / concrete paver】 path leading straight to the centered entrance. No trees, no tall plants, no shrubs in front of the building; the façade stays fully exposed. - Cohesive, high-end, natural material palette: warm wood, off-white, charcoal, soft greens. ## 5. Technical Specifications ### 5.1 Photography Style Professional real-estate / architectural exterior photography, Architectural Digest style, ultra-realistic, sharp, magazine-quality. ### 5.2 Lighting Bright sunny midday with clear, cloudless deep-blue sky and strong overhead sunlight. Crisp, even natural daylight evenly illuminating the whole façade, true-to-life colors, gentle short midday shadows, warm interior glow faintly visible through the glass. No sunset, no golden hour, no overcast, no haze. ### 5.3 Camera Settings Full-frame DSLR, wide-angle architectural lens (~24mm), corrected verticals (no keystone distortion), eye-level tripod height, f/8 aperture, high dynamic range (HDR), razor-sharp focus across the whole building.

Guía de variables

【modern minimalist / Scandinavian / Japandi — choose to taste】

Elige el estilo arquitectónico de la casa (minimalista moderno, escandinavo o Japandi) y sustituye todo el corchete por una opción.

Sección 4 de la plantilla, línea **Estilo arquitectónico:**

Valor de ejemplo

modern minimalist

【timber pivot / glass】

Tipo de puerta principal: giratoria de madera o cristal — elige una y quita la barra.

Sección 4, línea **Entrada:**

Valor de ejemplo

timber pivot

【dark charcoal standing-seam metal】

Material y color del techo; por defecto metal de juntas verticales en gris carbón oscuro.

Sección 4, línea **Techo:**

Valor de ejemplo

dark charcoal standing-seam metal

【warm vertical timber cladding】

Primer material de revestimiento exterior; por defecto revestimiento de madera vertical cálida.

Sección 4, línea **Muros:** — primer corchete 【】

Valor de ejemplo

warm vertical timber cladding

【smooth off-white render/stucco】

Segundo material de los muros; por defecto revoque/estuco blanco roto liso.

Sección 4, línea **Muros:** — segundo corchete 【】

Valor de ejemplo

smooth off-white render/stucco

【pale stone / concrete paver】

Material del camino de entrada: piedra clara o baldosas de hormigón — elige una.

Sección 4, línea **Jardinería:**

Valor de ejemplo

pale stone

Qué obtienes

  • Una fotografía exterior fotorrealista de calidad de revista de una casa terminada de una planta, a nivel del ojo y con ligero ángulo de tres cuartos.
  • Una traducción fiel 1:1 del plano de referencia: huella rectangular horizontal ancha (aprox. 16:9), ventanas y puertas en los huecos del plano, y mobiliario interior tenuemente visible tras el cristal en sus posiciones correctas.
  • Una escena sin obstrucciones: sin árboles, coches ni elementos delante de la fachada, cielo azul profundo despejado e iluminación uniforme de mediodía soleado.
  • Sin texto, cotas ni marcas de agua — solo una imagen fotográfica limpia.

Casos de uso

  • Mostrar una casa terminada a clientes o compradores potenciales antes de construirla.
  • Visualizaciones arquitectónicas e inmobiliarias y material de marketing para listados.
  • Comparar opciones de materiales, techo y puertas editando los valores 【】 y regenerando.
  • Documentación visual para portafolios de diseño de interiores/exteriores.

Cómo usarlo

  • Prepara una imagen de plano/maqueta 3D en vista cenital sin techo y súbela como primera imagen de referencia (se citará como @img1) al generar.
  • Copia la plantilla y sustituye cada corchete 【】 con tus elecciones: estilo arquitectónico, puerta principal, techo, revestimiento de muros, acabado y material del camino — elige un valor por corchete y elimina las alternativas.
  • Como indican las instrucciones originales, puedes pedir a una IA generativa como Claude que te ayude a ajustar la plantilla a tu gusto.
  • Pega el prompt editado en Nano Banana Pro, adjunta la imagen del plano de referencia y genera la imagen.
  • Compara el resultado con el plano: huella, huecos de ventanas/puertas y mobiliario coincidentes, entrada centrada; si se desvía, regenera reforzando las reglas estrictas de la Sección 2.

Prompts relacionados