Skip to content
ImagesFree

Generate Completed House Exterior From Floor Plan

A full Arabic prompt template that turns a 3D floor plan/dollhouse reference image (@img1) into a photorealistic exterior photo of a finished single-story house, with strict fidelity to footprint, window/door and furniture placement, and customizable materials in 【】 brackets.

Gemini

Source previews

These example images come from the original source. DROPIDEA has not independently tested these examples; results depend on the model and settings.

Ready to personalize

Your prompt

English

Replace the red variables with your information. Copy the full prompt and use it with your preferred agent.

TXT MD English version
④ Generate an exterior image of the completed house Next, referring to the 3D floor plan, create an image of the completed house. Please use the following prompt as a template. If you insert your completed image concept into the parts enclosed in 【】, an exterior matching that instruction will be generated. ※There are multiple 【】 This part is also easier if you ask a generative AI like Claude. After modifying the template, generate the image with Nano Banana Pro. Template↓ -------------- # Optimized Image Generation Prompt — Floor Plan / Dollhouse → Exterior Photo ## 1. Core Concept & Objective A photorealistic architectural exterior photograph of the COMPLETE finished house derived from the reference `@img1` (a roofless top-down dollhouse / floor plan). Build the full building envelope: add a roof, exterior walls, façade, windows, and a front entrance, while keeping the overall footprint, proportions, room positions, window/door placement, and interior furniture layout strictly consistent with `@img1`. The reference defines the exact layout and scale — the output is a real, fully built single-story house seen from outside, whose form is a faithful 1:1 translation of the plan. ## 2. Layout Fidelity (Strict — Highest Priority) The exterior MUST be a direct, faithful translation of the floor plan in `@img1`. Obey the geometry of the plan exactly: - **Footprint & proportions:** The building is a single, wide HORIZONTAL RECTANGLE (landscape footprint, roughly 16:9). Do not make it square, L-shaped, or multi-volume. Keep the same width-to-depth ratio as `@img1`. - **Single story:** Exactly one level. No second floor, no loft, no basement, no stairs. - **Entrance location:** The main front entrance sits at the BOTTOM-CENTER of the plan, so it must appear at the CENTER of the FRONT (camera-facing) façade. Do not move it to a corner or side. - **Window positions = plan openings:** Place exterior windows ONLY where window openings exist in `@img1`, on the matching wall, in the matching position and relative width. Front façade windows correspond to the rooms along the bottom edge (entrance hall and living room); side and rear windows correspond to the bedrooms, kitchen, and bathroom openings. Do not add windows to blank wall sections, and do not delete openings shown in the plan. - **Door positions:** Exterior doors (the main entrance and any secondary exterior doors shown in `@img1`, e.g. the kitchen-side and living-room-side doors) appear at their corresponding wall locations. The main entry is a single centered front door. - **Interior furniture visible through glazing (match the plan):** Through the windows and glass doors the interior must be faintly but clearly visible, and the furniture seen inside MUST match the placement, type, and orientation drawn in `@img1`. Behind the living-room glazing show the sofas and coffee table where the plan places them; behind the dining glazing show the dining table and chairs; behind the kitchen window show the kitchen counter/island; behind each bedroom window show the bed in its plan position. Do NOT invent furniture in empty areas, and do NOT rearrange, add, or relocate furniture relative to the plan. Keep it as a soft, realistic interior glimpse (not a sharp catalog shot), consistent with the room each window belongs to. - **Room-to-façade logic:** The wider, more open spaces (living room, dining, kitchen) get larger glazing; the bedrooms, bathroom, and toilet get smaller/higher windows. Wall solidity and window rhythm must read as the same layout as the plan. - **Forbidden:** Do NOT invent extra wings, extensions, garages, balconies, or rooms not present in `@img1`. Do NOT change the number, order, or position of openings or furniture. The reference is the source of truth for FORM and FURNITURE PLACEMENT. Materials, roof, garden, sky, and lighting (Sections 4–5) are free creative additions, but they must never alter the footprint, story count, opening positions, or furniture layout defined above. ## 3. View & Output Rules **VIEW RULE:** Eye-level exterior view from the front, slight three-quarter angle (about 15–25° off-axis) to show the front façade and one side. Ground-level human perspective, NOT top-down, NOT a floor plan. Show the whole house within the frame with a little space around it. Keep the bottom-center entrance clearly visible on the front façade. **UNOBSTRUCTED RULE (important):** The ENTIRE house must be fully visible and completely unobstructed. Do NOT place any object between the camera and the building. Absolutely NO trees, tall shrubs, hedges, ornamental grasses, potted plants, fences, walls, poles, cars, people, signage, or any element that overlaps, covers, or blocks any part of the façade, roof, windows, or entrance. The foreground in front of the house is kept clear (low lawn or paving only). Every wall, window, and door of the house reads cleanly with nothing crossing in front of it. **TEXT RULE:** Do NOT include any text, labels, dimensions, arrows, watermark, or floor-plan markings of any kind. A clean photographic image only. ## 4. Subject & Materials A modern single-story residence matching the size and proportions of `@img1`. - **Architectural style:** 【modern minimalist / Scandinavian / Japandi — choose to taste】. - **Number of stories:** single-story (one level), low horizontal massing. - **Entrance:** a clear front entry at the center of the front façade with a 【timber pivot / glass】 front door. - **Glazing:** floor-to-ceiling windows and sliding glass doors at the plan's opening positions, clear enough that the interior furniture (matching `@img1`) stays faintly visible inside; use only sheer/partial curtains so the rooms and their furniture remain readable. - **Roof:** 【dark charcoal standing-seam metal】 roof, low-pitch gable, with slim gutters and eaves, sized to the rectangular footprint. - **Walls:** a mix of 【warm vertical timber cladding】 and 【smooth off-white render/stucco】. - **Framing & trim:** black aluminium window frames. - **Landscaping:** keep it minimal and LOW so nothing blocks the house — a neat, flat green lawn and a 【pale stone / concrete paver】 path leading straight to the centered entrance. No trees, no tall plants, no shrubs in front of the building; the façade stays fully exposed. - Cohesive, high-end, natural material palette: warm wood, off-white, charcoal, soft greens. ## 5. Technical Specifications ### 5.1 Photography Style Professional real-estate / architectural exterior photography, Architectural Digest style, ultra-realistic, sharp, magazine-quality. ### 5.2 Lighting Bright sunny midday with clear, cloudless deep-blue sky and strong overhead sunlight. Crisp, even natural daylight evenly illuminating the whole façade, true-to-life colors, gentle short midday shadows, warm interior glow faintly visible through the glass. No sunset, no golden hour, no overcast, no haze. ### 5.3 Camera Settings Full-frame DSLR, wide-angle architectural lens (~24mm), corrected verticals (no keystone distortion), eye-level tripod height, f/8 aperture, high dynamic range (HDR), razor-sharp focus across the whole building.
Preview results

Your prompt

④ Generate an exterior image of the completed house Next, referring to the 3D floor plan, create an image of the completed house. Please use the following prompt as a template. If you insert your completed image concept into the parts enclosed in 【】, an exterior matching that instruction will be generated. ※There are multiple 【】 This part is also easier if you ask a generative AI like Claude. After modifying the template, generate the image with Nano Banana Pro. Template↓ -------------- # Optimized Image Generation Prompt — Floor Plan / Dollhouse → Exterior Photo ## 1. Core Concept & Objective A photorealistic architectural exterior photograph of the COMPLETE finished house derived from the reference `@img1` (a roofless top-down dollhouse / floor plan). Build the full building envelope: add a roof, exterior walls, façade, windows, and a front entrance, while keeping the overall footprint, proportions, room positions, window/door placement, and interior furniture layout strictly consistent with `@img1`. The reference defines the exact layout and scale — the output is a real, fully built single-story house seen from outside, whose form is a faithful 1:1 translation of the plan. ## 2. Layout Fidelity (Strict — Highest Priority) The exterior MUST be a direct, faithful translation of the floor plan in `@img1`. Obey the geometry of the plan exactly: - **Footprint & proportions:** The building is a single, wide HORIZONTAL RECTANGLE (landscape footprint, roughly 16:9). Do not make it square, L-shaped, or multi-volume. Keep the same width-to-depth ratio as `@img1`. - **Single story:** Exactly one level. No second floor, no loft, no basement, no stairs. - **Entrance location:** The main front entrance sits at the BOTTOM-CENTER of the plan, so it must appear at the CENTER of the FRONT (camera-facing) façade. Do not move it to a corner or side. - **Window positions = plan openings:** Place exterior windows ONLY where window openings exist in `@img1`, on the matching wall, in the matching position and relative width. Front façade windows correspond to the rooms along the bottom edge (entrance hall and living room); side and rear windows correspond to the bedrooms, kitchen, and bathroom openings. Do not add windows to blank wall sections, and do not delete openings shown in the plan. - **Door positions:** Exterior doors (the main entrance and any secondary exterior doors shown in `@img1`, e.g. the kitchen-side and living-room-side doors) appear at their corresponding wall locations. The main entry is a single centered front door. - **Interior furniture visible through glazing (match the plan):** Through the windows and glass doors the interior must be faintly but clearly visible, and the furniture seen inside MUST match the placement, type, and orientation drawn in `@img1`. Behind the living-room glazing show the sofas and coffee table where the plan places them; behind the dining glazing show the dining table and chairs; behind the kitchen window show the kitchen counter/island; behind each bedroom window show the bed in its plan position. Do NOT invent furniture in empty areas, and do NOT rearrange, add, or relocate furniture relative to the plan. Keep it as a soft, realistic interior glimpse (not a sharp catalog shot), consistent with the room each window belongs to. - **Room-to-façade logic:** The wider, more open spaces (living room, dining, kitchen) get larger glazing; the bedrooms, bathroom, and toilet get smaller/higher windows. Wall solidity and window rhythm must read as the same layout as the plan. - **Forbidden:** Do NOT invent extra wings, extensions, garages, balconies, or rooms not present in `@img1`. Do NOT change the number, order, or position of openings or furniture. The reference is the source of truth for FORM and FURNITURE PLACEMENT. Materials, roof, garden, sky, and lighting (Sections 4–5) are free creative additions, but they must never alter the footprint, story count, opening positions, or furniture layout defined above. ## 3. View & Output Rules **VIEW RULE:** Eye-level exterior view from the front, slight three-quarter angle (about 15–25° off-axis) to show the front façade and one side. Ground-level human perspective, NOT top-down, NOT a floor plan. Show the whole house within the frame with a little space around it. Keep the bottom-center entrance clearly visible on the front façade. **UNOBSTRUCTED RULE (important):** The ENTIRE house must be fully visible and completely unobstructed. Do NOT place any object between the camera and the building. Absolutely NO trees, tall shrubs, hedges, ornamental grasses, potted plants, fences, walls, poles, cars, people, signage, or any element that overlaps, covers, or blocks any part of the façade, roof, windows, or entrance. The foreground in front of the house is kept clear (low lawn or paving only). Every wall, window, and door of the house reads cleanly with nothing crossing in front of it. **TEXT RULE:** Do NOT include any text, labels, dimensions, arrows, watermark, or floor-plan markings of any kind. A clean photographic image only. ## 4. Subject & Materials A modern single-story residence matching the size and proportions of `@img1`. - **Architectural style:** 【modern minimalist / Scandinavian / Japandi — choose to taste】. - **Number of stories:** single-story (one level), low horizontal massing. - **Entrance:** a clear front entry at the center of the front façade with a 【timber pivot / glass】 front door. - **Glazing:** floor-to-ceiling windows and sliding glass doors at the plan's opening positions, clear enough that the interior furniture (matching `@img1`) stays faintly visible inside; use only sheer/partial curtains so the rooms and their furniture remain readable. - **Roof:** 【dark charcoal standing-seam metal】 roof, low-pitch gable, with slim gutters and eaves, sized to the rectangular footprint. - **Walls:** a mix of 【warm vertical timber cladding】 and 【smooth off-white render/stucco】. - **Framing & trim:** black aluminium window frames. - **Landscaping:** keep it minimal and LOW so nothing blocks the house — a neat, flat green lawn and a 【pale stone / concrete paver】 path leading straight to the centered entrance. No trees, no tall plants, no shrubs in front of the building; the façade stays fully exposed. - Cohesive, high-end, natural material palette: warm wood, off-white, charcoal, soft greens. ## 5. Technical Specifications ### 5.1 Photography Style Professional real-estate / architectural exterior photography, Architectural Digest style, ultra-realistic, sharp, magazine-quality. ### 5.2 Lighting Bright sunny midday with clear, cloudless deep-blue sky and strong overhead sunlight. Crisp, even natural daylight evenly illuminating the whole façade, true-to-life colors, gentle short midday shadows, warm interior glow faintly visible through the glass. No sunset, no golden hour, no overcast, no haze. ### 5.3 Camera Settings Full-frame DSLR, wide-angle architectural lens (~24mm), corrected verticals (no keystone distortion), eye-level tripod height, f/8 aperture, high dynamic range (HDR), razor-sharp focus across the whole building.

Variable guide

【modern minimalist / Scandinavian / Japandi — choose to taste】

Choose the house's architectural style (modern minimalist, Scandinavian or Japandi) to taste and replace the whole bracket with one option.

Section 4 of the template, the **Architectural style:** line

Example value

modern minimalist

【timber pivot / glass】

Front door type: timber pivot or glass — pick one and remove the slash.

Section 4, the **Entrance:** line

Example value

timber pivot

【dark charcoal standing-seam metal】

Roof material and color; default is dark charcoal standing-seam metal.

Section 4, the **Roof:** line

Example value

dark charcoal standing-seam metal

【warm vertical timber cladding】

First exterior wall material; default is warm vertical timber cladding.

Section 4, the **Walls:** line — first 【】 bracket

Example value

warm vertical timber cladding

【smooth off-white render/stucco】

Second wall material in the mix; default is smooth off-white render/stucco.

Section 4, the **Walls:** line — second 【】 bracket

Example value

smooth off-white render/stucco

【pale stone / concrete paver】

Entry path material: pale stone or concrete pavers — pick one.

Section 4, the **Landscaping:** line

Example value

pale stone

What you get

  • A photorealistic, magazine-quality exterior photograph of a finished single-story house at eye level with a slight three-quarter angle.
  • A faithful 1:1 translation of the reference plan: wide horizontal rectangular footprint (roughly 16:9), windows and doors at the plan's openings, and interior furniture faintly visible through glazing in its correct positions.
  • An unobstructed scene: no trees, cars or elements in front of the façade, clear deep-blue sky and even sunny midday lighting.
  • No text, dimensions or watermarks — a clean photographic image only.

Use cases

  • Presenting a finished home to clients or prospective buyers before actual construction.
  • Architectural and real-estate visualizations and marketing materials for listings.
  • Comparing material, roof and door options by editing the 【】 values and regenerating.
  • Visual documentation for interior/exterior design portfolios.

How to use

  • Prepare a top-down, roofless 3D floor plan/dollhouse image and upload it as the first reference image (it will be referenced as @img1) when generating.
  • Copy the template and replace every 【】 bracket with your choices: architectural style, front door, roof, wall cladding, render, and path material — pick one value per bracket and remove the alternatives.
  • As the original instructions note, you can ask a generative AI like Claude to help tailor the template to your taste.
  • Paste the edited prompt into Nano Banana Pro, attach the reference floor-plan image, and generate the image.
  • Compare the result against the plan: matching footprint, window/door openings and furniture, centered entrance; if it drifts, regenerate after emphasizing the strict rules in Section 2.

Related prompts